Finlock gutters are a concrete guttering system generally found in properties dated between 1950 and 1970. Primarily manufactured by a company called Royston, numerous different styles of Finlock concrete gutters were launched to the housing market and in recent times companies committed to their maintenance and replacement have jumped up throughout the country.
Why were Finlock concrete gutters introduced?
It is said that the Finlock concrete gutter system was launched to replace cast iron gutters, and with a shortage of steel at the time concrete was viewed as a low cost and durable alternative. Furthermore, with the increasing usage of cavity constructed walls during this period, the Finlock concrete gutter system worked well in sealing the top of cavity walls and could also serve a load-bearing role for openings where windows and doors had been placed.
Finlock concrete gutters are made up of two horizontal troughs which sit at the head of cavity walls. One trough is the visible gutter and the other trough spans the cavity (the gap between the walls) sitting on the internal wall.
Varying in length between 200mm and 250mm, Finlock blocks were occasionally connected to each other using steel-reinforced rods and mortar. The joints were then sealed and troughs lined with a waterproof coating such as bitumen or lined with mineral felt.
Common problems associated with Finlock concrete gutters
Despite being a great idea at the moment in time, in recent years Finlock concrete gutters have been a nightmare for numerous homeowners due to their short lifespan (of approximately 30 years) and subsequent failure. Having been exposed to many weather cycles and shifting living conditions, the following failures are commonly reported by homeowners:
There are many reasons why the lining in Finlock concrete gutters fail, but the main cause is related to the thermal expansion and contraction of the lining, which is the expansion and contraction of the lining in response to temperature changes. In this instance, some linings may separate at junctions or weak points and the heavy inflexible concrete troughs can crack at joints providing the perfect entry point for water.
When the lining fails in Finlock concrete gutters, the damage can be extensive and should be addressed immediately. Left unrepaired, water in the gutter may enter weak points in the guttering ending up in the cavity and causing costly damage to the wall ties, insulation, internal plaster or other wall finishes and damp – the source of the leak can also be extremely difficult to find! Externally, perished joints can also result in water running down the outer face of the brickwork, leaving a dark and unsightly stain.
If you live in a property that has Finlock concrete gutters and you’ve noticed a horizontal grey band on the perimeter walls at a high level then this can be attributed to ‘cold bridging’. Cold bridging occurs when a cold material comes into contact with a warmer material and causes the warmer material to cool down. In terms of Finlock concrete gutters, this cold material is the concrete and the warmer material is the inner leaf of the masonry wall. The horizontal grey band is the result of condensation – warm moisture-laden air settling on cool surfaces – and can lead to wallpaper peeling away at the top of the wall. On tiled walls, you may see that the tiles become slightly raised.
Whilst internal and external temperature conditions aren’t too much of an issue in the summer when it’s cold in the winter and you decided to crank up the radiator, the temperature difference between the internal and external environments is greater, which will exacerbate the problem of cold bridging. In modern homes where there is a tendency to replace single glazed units with double glazing along with complex heating systems, internal room temperatures will also be higher.
Sagging and uneven gutters
As previously mentioned, Finlock concrete gutters can act as lintels for window and door openings, however, where they haven’t been adequately filled or strengthened at the time of the installation due to and poor workmanship they can sag slightly. Sagging can also occur when windows are poorly replaced making them more difficult to open/close.
Finlock Gutter Solutions
There are generally two ways to resolve the problems associated with Finlock concrete gutters and both options come down to how much the property owner is willing to spend.
Option 1: Complete Replacement
Complete replacement of Finlock concrete gutters is the most costly option but removes the problems associated with this guttering system if carried out by experienced tradesmen.
How to replace concrete guttering:
- Erect scaffolding/platform around the property to provide a safe working area in accordance with Health and Safety Executive guidelines.
- Remove the bottom rows of roof tiles above the gutter to ensure they don’t get damaged and determine whether the underlying felt is in good condition.
- Remove failed linings from the existing gutters.
- Remove faceplates from the Finlock concrete gutter (this varies depending on your gutter profile).
- Cut away the gutter using a diamond-tipped angle grinder so that a flush and level base is achieved. How far this is cut back is dependent on the tile overhang of your roof. Note: Some Finlock concrete gutters and down pipes may contain asbestos so it is important that this is identified before any concrete gutter removal works take place.
- Fix pressured timber faceplate to the face of the concrete.
- Fix PVC/Aluminium soffit and fascia to the timber faceplate.
- Fixing new guttering connecting it to your neighbour’s guttering system where applicable ensuring it runs on the same line as your neighbour’s gutters. It is advised to discuss this with your neighbours well in advance.
- Install an eaves protector.
- Replace the roof tiles.
- Dismantle scaffolding/platform and clean the surrounding premises.
Depending on the size of your property, this work can be carried out in a couple of hours and shouldn’t cause too much disruption to your neighbours.